You're patching leaks every few months. We'll repipe the house in copper.
A copper repipe replaces the supply lines throughout the house so the leaks stop and the pressure comes back. We plan the routes to keep drywall openings minimal, pull the permit, and patch what we open.
- 5.0 on Google · 157 reviews
- Same-day service
- Camera inspection included
- CSLB #1092432
YelpYelp
Guaranteed
GoogleGoogle
Guaranteed
BBBBBB
Accredited
Camera-verified · Upfront written price · Same-day
Tap what's happening at your house.
Signs the piping itself is finished
Your result
Nothing checked yet.
Tap a symptom or two. Most homeowners recognize at least one.
Why supply lines fail in this area
- 01Hard water erosionMineral-heavy water thins copper from the inside, hot lines first, until pinholes open.
- 02Galvanized corrosionSteel pipe rusts inside and out. Flow drops, water discolors, and threads fail at the joints.
- 03Pressure above specStatic pressure over about 80 psi is common here and shortens the life of every fitting and line.
We diagnose first, then you choose
Copper is rigid, proven, and what most people picture in a quality repipe. PEX is flexible, installs with fewer wall openings, and resists the scale that eats copper. We install both and we'll tell you which suits your house and budget.
Copper repipe
Best for homeowners who want traditional rigid piping, exposed runs in garages, and long proven service life.
PEX repipe
Best for fewer wall openings, faster installation, and better resistance to hard-water scale.
See PEX repipeFrom walk-through to inspection and patched walls
- 01
Walk the house
We map fixtures, routes and access, then quote the whole scope in writing including patching.
- 02
Permit and prep
Permit pulled, furniture protected, dust containment set, access openings planned to be as few as possible.
- 03
Run the new system
New lines to every fixture, new stops and connections, then pressure test and city inspection.
- 04
Patch and clean
Drywall patched to the agreed scope, everything cleaned, and we check pressure at each fixture with you.
You'll see the number before we start
A repipe is quoted in writing as one scope covering permit, materials, patching and testing. What drives it:
- Number of fixtures and bathrooms, and the size of the home.
- One story or two, and whether attic and crawlspace access is workable.
- Slab construction versus raised foundation.
- How much drywall patching and finish restoration is included.
“They planned the routes to minimize wall openings, handled the permit and inspection, and the quote never changed.”
Questions we get on the phone
Two to four days for most single-family homes in Cerritos and the surrounding cities, including inspection and patching. Water is off only during working hours, not overnight.
Based in Cerritos, on the road across Orange County and the South Bay every day.
Based in Cerritos. Serving Orange County and the South Bay, most calls get a same-day slot.
Stop patching leaks one at a time. Let's repipe it.
Call and a real person from the crew picks up. We'll walk the house and price the whole scope in writing.
You're patching leaks every few months. We'll repipe the house in copper.
Tell us what's going on. A real person from the crew calls you back with a straight answer and a flat price.
