Your shut-off valve is stuck. We'll make sure it works when you need it.
Old multi-turn stops seize, weep, and snap off in your hand at the worst possible moment. We replace them with quarter-turn ball valves, so the next time something leaks you can stop it yourself in one motion.
- 5.0 on Google · 157 reviews
- Same-day service
- Camera inspection included
- CSLB #1092432
YelpYelp
Guaranteed
GoogleGoogle
Guaranteed
BBBBBB
Accredited
Camera-verified · Upfront written price · Same-day
Tap what's happening at your house.
Signs a valve is a liability
Your result
Nothing checked yet.
Tap a symptom or two. Most homeowners recognize at least one.
Why valves in this area seize
- 01Hard-water mineral depositsScale builds on the stem and seat of a valve that's rarely operated, then it won't budge.
- 02Old multi-turn designThe rubber washer stops in mid-century homes were never built to last decades untouched.
- 03High pressure and corrosionPressure over about 80 psi stresses every fitting, and old galvanized connections corrode at the threads.
We diagnose first, then you choose
One bad stop is a quick swap. If your home still has original multi-turn stops throughout, doing them together in one visit costs far less per valve than four separate calls — and if the main shut-off is questionable too, that's the one worth prioritizing.
Replace the individual stop
Best when one valve has failed and the rest still operate. Fast and low cost.
Whole-house valve upgrade
Best for older homes with original stops everywhere, or when the main shut-off no longer holds.
See pinhole leak repairFrom your call to a valve that turns
- 01
Tell us which valve
Under a sink, at the toilet, a hose bib, or the main. Location decides whether water gets shut off house-wide.
- 02
Inspect and quote
We check the valve, the pipe it's on, and the pressure, then price it in writing.
- 03
Replace it
New quarter-turn valve and supply line, properly connected. Area protected and dried.
- 04
Test and show you
We operate it, confirm it holds, and make sure you know where your main shut-off is and how it works.
You'll see the number before we start
Valve work is quoted in writing on site. What moves the number:
- How many valves you're having done — grouping them lowers the per-valve cost.
- Pipe material and condition at the connection, especially old galvanized.
- Whether the house water has to be shut down for the work.
- Main shut-off or hose bib work versus a simple under-sink angle stop.
“They replaced every old angle stop in the house in one visit and showed my wife where the main shut-off is. Straightforward pricing, no surprises.”
Questions we get on the phone
Hard-water scale has seized the stem. Forcing it is how people snap the handle or the valve body and turn a small job into a flooded cabinet. Replacing it with a quarter-turn valve is inexpensive and permanent.
Based in Cerritos, on the road across Orange County and the South Bay every day.
Based in Cerritos. Serving Orange County and the South Bay, most calls get a same-day slot.
A stuck valve is a bad surprise. Let's replace it first.
Call and a real person from the crew picks up. Ask us to check your stops and main shut-off on the next visit.
Your shut-off valve is stuck. We'll make sure it works when you need it.
Tell us what's going on. A real person from the crew calls you back with a straight answer and a flat price.
